Manufacturer: Fujitsu | Model: M2954SYU | TD# 265079 |
Interface... Fast SCSI-2 | Formatted Capacity... 4350.0 MB |
Cylinders | 5565 | Heads | 10 | Sectors | Variable |
Landing Zone | Max Cyl | Precomp | N/A | RWC Cyl | N/A |
Encoding Method | RLL8,9 | Xfer/Mb(async/sync) | 6/20 | MTBF (Hr X 1000) | 1000 |
Form factor | 3.5" | Novell Y/N | Y | Height | 1.62" |
Power (Min) | 1.1W | Power (Max) | 15.5W | Speed | 7200 |
Avg seek (ms) | 8 | Cache | 512k | Mfg. Warranty | 5 YRS |
Copyright ⌐ 1996, 1997 Tech Data Corporation
Configuration and Jumper Options
SCSI ID Jumper Settings CN7
ID No. | 1-2 | 3-4 | 5-6 |
0 | OFF | OFF | OFF |
1 | ON | OFF | OFF |
2 | OFF | ON | OFF |
3 | ON | ON | OFF |
4 | OFF | OFF | ON |
5 | ON | OFF | ON |
6 | OFF | ON | ON |
7 | ON | ON | ON |
CN7 configuration jumper and external panel options
Pins | Option setting | Default |
---|---|---|
7-8 | Spyndle sync Pulse signal (input) | OFF (not used) |
9-10 | Disk Drive Reset | OFF (Disabled) |
11-12 | Write Protect | OFF (Disabled) |
13-14 | SCSI Terminating Resister Connected | ON (Enabled) |
15-16 | LED Signal (Output) | OFF (not used) |
CN6 Options Settings
Pin | Setting | Description | Default Settings |
---|---|---|---|
D | (pins 5-6) | Offline diagnostic mode | OFF = normal operation |
P | (pins 3-4) | SCSI bus parity checking | ON = Parity enabled |
A | (pins 1-2) | Automatic motor start | ON = motor starts at power on |
[Main
Menu] [Hard
Drives] [Controllers] [Tape Drives] [Glossary]